Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in West Palm Beach?
Panel replacement in West Palm Beach typically costs $250 – $500 for a single-section repair on a standard sectional door. Most homes we see in neighborhoods like Flamingo Park and Grandview Heights land near the middle of that range, around $300 – $380, when only one or two panels are damaged. Full panel sets, custom colors, and impact-rated sections push toward the higher end. Prices below reflect the West Palm Beach market as of 2026.
Panel Replacement Cost Breakdown (2026)
Here’s what the individual pieces of a panel job run in West Palm Beach. These ranges are for residential sectional doors, which covers the vast majority of homes from Northwood to the Acreage.
| Service | West Palm Beach Price Range |
|---|---|
| Single panel replacement (standard steel) | $250 – $400 |
| Two or more panels (same door) | $350 – $500 |
| Impact-rated / hurricane-rated panel | $400 – $500 |
| Custom color or woodgrain finish | Add $40 – $90 per panel |
| Panel + roller replacement (bundle) | $110 – $220 added |
| Panel + track realignment (bundle) | $120 – $240 added |
| Panel + spring repair (bundle) | $180 – $340 added |
| Full garage door repair (broader fix) | $150 – $600 |
What pushes a panel job toward the top of the range? Impact-rated sections, custom finishes, and any job that requires re-hanging or re-tensioning the door afterward. What keeps it low? A single dented lower panel on a standard white steel door, with the rest of the door already tracking clean. If the panel is the only issue, we can usually quote you a firm number over the phone once we know the door brand and panel size. That’s one reason brand fluency matters: whether it’s a Clopay, Amarr, Wayne Dalton, or Raynor panel you’re replacing, we recognize the profile on arrival rather than guessing.
If you’re weighing panel replacement against a full new door, the broader home service page explains where panel work fits in the range of options we handle.
What Affects Panel Replacement Pricing in West Palm Beach
Five things move the price most in this market. South Florida’s climate and building code are two of them, and they’re the two most homeowners don’t see coming.
- Impact rating. West Palm Beach sits in a high-velocity hurricane zone, and many neighborhoods require impact-rated or wind-load-rated panels for permitted replacement work. A rated panel costs meaningfully more than a standard one. If you’re replacing a single section on an existing impact door, we have to match the rating, not downgrade it.
- Panel count and placement. One lower panel is the cheapest scenario. Damage that spans two or more sections, or hits the top panel where it meets the header, adds time and material. Top-panel jobs often reveal track or torsion issues underneath.
- Salt air and humidity. Homes closer to the Intracoastal, like those around El Cid and Southland Park, see faster corrosion on steel panels, hinges, and rollers. A panel swap on a door with salt-bitten hardware frequently turns into a hardware bundle. We tell you up front when that’s likely.
- Color and finish matching. Fading is real in our sun. A new white panel next to a five-year-old white panel can look different by the time both are in the same light. Custom-tinted or factory-matched finishes cost more but avoid the two-tone look.
- Door brand and panel availability. Some older doors use discontinued profiles. When a direct-match panel isn’t available, we source the closest compatible section or recommend a two-panel replacement to keep the door visually even. Because we work across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, we know which profiles still ship and which require a workaround.
- Bundle with opener or spring service. If your opener is straining or a spring is near the end of its life, handling both in one visit saves you a second trip charge. Our full Panel Replacement in West Palm Beach service page covers how we scope combined jobs.
How to Save on Panel Replacement
There’s no magic discount, but a few practical moves keep panel work near the low end of the $250 – $500 range.
- Fix it before it cascades. A dented lower panel that’s left alone often leads to a misaligned track or worn rollers within a season. Replacing the panel early avoids the $120 – $240 track realignment add-on later.
- Bundle the obvious items. If your rollers are already squeaking or a spring looks stretched, ask us to quote the panel and the hardware together. One visit, one labor charge, less downtime.
- Match, don’t upgrade, when you can. If your existing door is a standard non-impact steel model and code allows a like-for-like panel, matching it is cheaper than switching a single section to impact. We’ll tell you honestly which path your home’s requirements allow.
- Get a firm written estimate before work starts. We quote the panel, the labor, and any likely add-ons in writing. Free estimates are part of how we work, and you can call (877) 265-9120 to get one.
- Ask about a two-panel replacement if your door is fading. Sometimes replacing two sections for a small upcharge beats replacing one and living with a visible mismatch. We’ll show you both prices.
One safety note before anyone touches a door with a damaged panel: garage doors are held under heavy spring tension, and a knocked-out panel can leave the door unbalanced in a way that’s genuinely dangerous to operate. We don’t recommend homeowners try to lift, prop, or remove panels themselves. A trained technician checks the spring and cable load before removing anything. If your door is off its track or hanging unevenly, stop using the opener and call us.
FAQs – Panel Replacement Cost
How much does a single garage door panel replacement cost in West Palm Beach?
A single standard steel panel typically runs $250 – $400 installed in West Palm Beach. Impact-rated panels start higher, around $400 – $500. Call (877) 265-9120 for an exact quote on your door’s brand and size; estimates are free.
Is it cheaper to replace a panel or the whole door?
Replacing one panel is almost always cheaper, often by a wide margin: a panel job runs $250 – $500 versus $700 – $2,200 for a full new door installation. Replace the whole door only when the frame, springs, and multiple panels are all near end of life. We’ll walk you through both numbers before you decide.
Can you come out today to look at a damaged panel?
In many cases, yes. Same-day visits are often available for West Palm Beach addresses, and we’ll confirm a window when you call. If the door is stuck open, off its track, or won’t close, treat it as urgent and reach us at (877) 265-9120.
Does the price include the opener if the opener is also failing?
No, opener work is quoted separately, but we can handle both in one visit. Opener repair runs $120 – $320, and a full opener installation runs $250 – $550. Because we service LiftMaster, Chamberlain, Genie, and Craftsman units directly, there’s no need to call a second company. Call (877) 265-9120 and we’ll bundle the quote.
Why is a hurricane-rated panel more expensive in West Palm Beach?
Impact-rated panels cost $400 – $500 versus $250 – $400 for standard, because they meet the wind-load requirements for this part of South Florida and carry thicker reinforcement. If your home’s existing door is rated, the replacement has to match it. Call (877) 265-9120 and we’ll tell you what your home requires.
Why West Palm Beach Homeowners Call Us for Panel Work
We’re a garage door specialist, not a generalist contractor splitting attention across plumbing, HVAC, and electrical. Panel replacement, opener repair, and full door installation are the whole of what we do. That focus means faster diagnosis and a cleaner first-visit fix. Whatever brand is on your garage, we know it, from Clopay and Amarr to Wayne Dalton and Raynor. From the panels to the opener, we cover the whole system, and we can service both the door and the opener unit in a single visit.
If you’re ready for a straight answer on what your panel replacement will cost, call (877) 265-9120 for a free estimate. We’ll quote the panel, the labor, and any likely add-ons in writing so there are no surprises when the truck pulls up.
Pricing reflects the West Palm Beach market as of 2026. West Palm Beach Garage Door Co offers free estimates – call (877) 265-9120.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Keisha Robinson"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
— Tracy Anderson"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Andres Hernandez