Genie Garage Door in Sunrise, FL

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as$59/month*On approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Get your free estimate

Genie Garage Door in Sunrise, FL | West Palm Beach Garage Door Co

We’re an independent Genie service provider covering Sunrise, and we fix Genie openers, sensors, and battery backups that common South Florida conditions beat up on. We also offer Genie service in Wilton Manors for nearby communities. The one thing that makes our Genie work here different: Sunrise is nearly all HOA-governed subdivisions, which means a replacement opener or even a sensor housing color can trigger a violation notice if it doesn’t match the community’s approved spec. We check that before you spend a dollar. Call (877) 265-9120 for a Genie opener diagnostic in Sunrise today.

Call (877) 265-9120

Why Sunrise Residents Choose Us for Genie Service

Garage doors are all we do. We’re not a handyman outfit splitting our attention between plumbing and electrical. We spend our days inside Genie openers, tracing circuit faults, replacing worn rails, and recalibrating sensors on the exact models sitting in Sunrise garages right now, from the SilentMax 1000 to the older Intellicode series still bolted to a lot of 1980s and 1990s ceilings. Phil Drummond, our owner, learned mechanical systems the hard way, turning wrenches before he ever started diagnosing logic boards. He grew up in Northwood Hills and has spent over two decades fixing doors across Palm Beach County, including plenty of calls into Sunrise subdivisions where a Genie opener refused to close the night before a work trip. A stuck door doesn’t wait, and neither should you.

Beyond the Genie fluency, we carry the parts that matter for this area. Salt-air corroded sensor contacts, UV-baked wiring, battery backups cooked by an unventilated garage in August. We stock genuine Genie-compatible OEM parts for logic boards, safety sensors, and battery backup units. When an aftermarket gear or rail actually outperforms the original, we’ll tell you that too. Whatever brand is on your garage, we know it, and for Genie owners in Sunrise, that means a diagnosis that names the real fault instead of a generic “board’s probably bad” guess. From the panels to the opener, we cover the whole system.

Explore

Styles & brands we work with

Raised-panel steel
Raised-panel steel
Carriage house
Carriage house
Modern flush
Modern flush
Full-view glass
Full-view glass
LiftMaster openers
LiftMaster openers
Chamberlain openers
Chamberlain openers

Common Genie Garage Door Problems We Solve in Sunrise

  • Logic board failures in older chain-drive Genies. South Florida power surges are brutal, and the humidity we live with corrodes circuit contacts from the inside. A Genie ChainMax 1000 that worked fine in January might be dead in July. We test the board before recommending replacement, because sometimes it’s the transformer, not the board, and we won’t sell you a part you don’t need.
  • Safety sensor misalignment and lens fogging. Salt-air film builds up fast on sensor lenses in Sunrise, and insects nest inside the housings. The result is an opener that intermittently reverses or refuses to close at all. We clean, recalibrate, and replace sensors when the internals are shot.
  • Battery backup units degrading early. A Genie opener with a battery backup sitting in a hot, unventilated Sunrise garage is living a short life. Sustained heat plus UV exposure kills those batteries faster than the manufacturer’s estimated lifespan. We test them honestly and replace only when they actually fail a load test.
  • Chain and rail wear from heavy original doors. Sunrise is full of 1970s and 1980s builder-grade steel sectional doors. They’re heavy. A Genie opener rated for a lighter door strains against that weight for years, and eventually the chain stretches and the rail wears. We’ll tell you when the opener is undersized for the door it’s lifting.
  • Genie Excelerator and screw-drive quirks. The screw-drive Excelerator was a workhorse, but the older ones develop carriage wear that makes a godawful grinding sound. In Sunrise’s humidity, that wear accelerates. We still service them, and we’ll be straight with you when a rebuild isn’t worth it.

Genie Service in Sunrise: What Local Conditions Mean for Your Equipment

Sunrise is a master-planned, heavily HOA-governed suburb built largely by developers like Arvida in the 1970s through the 1990s. That history shapes Genie garage door work here in a way it doesn’t in a neighboring city like Lauderhill or West Palm Beach, or even across town with Boulevard Gardens Genie service. Most homes sit in subdivisions with architectural-review committees that regulate door style, panel pattern, window placement, and even hardware color. So when a Genie opener upgrade changes the door’s operation speed or adds visible smart hardware, that’s not just a mechanical decision. It can require written HOA approval before work starts. We routinely verify a homeowner’s community spec, including the approved hardware color, before ordering parts. In a Sunrise HOA subdivision off West Oakland Park Boulevard, our tech diagnosed a Genie SilentMax 1000 that would open but not close. The safety sensors had salt-air film on the lenses and one bracket was bent from a lawn edger. We replaced the sensor pair, recalibrated alignment, and confirmed the new sensor housing matched the community’s approved hardware color before finishing. That extra check is the difference between a working door and a violation letter in the mail.

Genie Models & Products We Service in Sunrise

We service the full Genie residential lineup that shows up in Sunrise garages. The SilentMax 1000 and ChainMax 1000 are the belt-drive and chain-drive workhorses we see most. The Excelerator screw-drive models are still around in older Sunrise homes, and we still fix them. The Intellicode series, which Genie sold for years and which still lives in a lot of original Sunrise installations, is where we do most of our logic board and sensor work. For parts, our rule is straightforward: genuine Genie-compatible OEM for anything that affects safety or signaling, like logic boards, sensors, and battery backups. We’ll use quality aftermarket gears and rails when they meet or beat OEM durability, which is often the case on Genie’s plastic gear sets. For Sunrise turnaround, we keep common Genie sensor pairs, batteries, and rail components stocked, which means less waiting when a repair can’t wait.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Genie Service Pricing in Sunrise

Here’s what Genie opener work typically runs in Sunrise. The price is quoted and agreed before any work starts, so the invoice doesn’t surprise you.

Service Price Range
Opener Repair $120 – $320
Opener Installation $250 – $550
Battery Backup Call for quote
Sensor Calibration Call for quote

Battery backup and sensor calibration are usually rolled into a broader opener repair or installation visit, which is why we quote them as part of the full job rather than as a standalone line item. The free estimate covers the diagnostic, the parts list, and the labor, so you know the full picture before you approve anything. One thing worth knowing: on older Genie openers with repeated board or motor failures, we’ll give you a repair-versus-replace assessment instead of pushing a rebuild that won’t survive another South Florida summer. Call (877) 265-9120 for a written quote on any Genie opener issue in Sunrise.

Serving Sunrise, FL — Our Local Coverage Area

We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Genie Garage Door in Sunrise

Service Areas Near Sunrise

Our Genie service covers Sunrise and the surrounding cities. We work regularly in Sunrise service area and the nearby communities. If you’re across the line in Genie service in Roosevelt Gardens or Genie service in Lauderhill, we’ve got you covered too. This brand-focused team also handles Genie sales & service for homeowners who want a whole-system approach, not just a patch job.

Book Your Genie Service in Sunrise Today

A Genie opener that won’t close doesn’t get better overnight. We offer same-day service for opener emergencies across Sunrise, and free estimates on every job. The quoted price is the price you pay, agreed before any work starts. Call (877) 265-9120 to get a Genie specialist out to your Sunrise home today, or reach out for Garage Door Repair in Sunrise if you need immediate help.

Written by Phil Drummond, Owner at West Palm Beach Garage Door Co, serving Sunrise and the surrounding area.

Need Garage Door help in Sunrise? Licensed & insured · same-day response · free estimates
Call (877) 265-9120
Areas We Serve

Request a Free Estimate in Sunrise

Tell us what you need — West Palm Beach Garage Door Co responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and agree to be contacted via phone, email, or SMS about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch