Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Opener Repair Across Sunset
Garage door opener repair in Sunset typically runs $120 – $320, and most jobs are finished the same visit. If your opener is grinding, reversing, or dead on the rail, call (877) 265-9120 and we’ll send a technician who knows the 33173 housing stock and won’t waste your morning. We work on openers attached to concrete-block ranch homes built from the late 1950s through the 1970s, which means tight clearances, older rails, and salt-corroded hardware are part of the everyday job here, not an exception.
Phil Drummond leads the team, and he’s built the company around one idea: garage doors are all we do. That focus matters when your opener is misbehaving and you need a diagnosis that doesn’t involve three return trips.
Why West Palm Beach Garage Door Co Is Sunset’s Preferred Garage Door Opener Repair Company
Sunset homeowners call us because we show up ready to work on whatever brand is already mounted to the ceiling. That’s LiftMaster, Chamberlain, Genie, Craftsman, Clopay, Amarr, Wayne Dalton, and Raynor. No “we only service what we sell” runaround. If your home came with a Chamberlain from 2008 or a Genie screw-drive from the 1990s, our tech identifies it on sight and carries common parts for it.
Response time to Sunset is tight. We route technicians from West Palm Beach and know the surface streets well enough to avoid the worst of Miller Drive and Sunset Drive traffic during school drop-off hours. That local knowledge keeps a one-hour window from becoming a two-hour wait.
We’re a dedicated garage door company. Plumbing, HVAC, electrical: not our trades. Opener repair is a subspecialty here, and our technicians diagnose logic-board failures, stripped gears, and misaligned photo-eyes every single week. When the problem spans both the door and the opener, we handle both in one visit. No referral to a third party, no second scheduling call.
Phil Drummond started this company to fix a simple industry problem: too many generalist contractors treat garage doors as a side job. In Sunset, where a malfunctioning opener can mean a car stuck inside a single-car garage and no street parking left, that difference shows up fast.
Styles & brands we work with
Garage Door Opener Not Working in Sunset
Garage Door Opener Not Working calls in Sunset usually trace back to one of three things: a stripped drive gear inside the motor head, a misaligned or sun-damaged photo-eye sensor, or a door that’s come out of balance and now trips the opener’s force settings. The repair itself runs $120 – $320 depending on which part failed and whether we’re also correcting a door imbalance at the same time. On older Sunset homes we often find the opener isn’t the root problem at all: the door has drifted out of square and the opener is fighting it.
Photo-Eye Realignment and Rolling-Code Reset
Salt-laden air from Biscayne Bay works on sensor housings and wiring connections over a few humid summers. A sensor that blinks red and refuses to close the door is frequently a corroded bracket or a shifted mount on a settling concrete slab. We realign, replace the bracket if it’s pitted, and reprogram the rolling-code remotes so the opener and the wall panel talk to each other again.
Logic Board and Gear Replacement
Chamberlain and LiftMaster openers made after 2005 use a plastic drive gear that’s intentionally sacrificial. When the door binds, the gear strips instead of the motor burning out. In Sunset’s tight single-car garages, a homeowner who keeps forcing the door against a rusted track gets a stripped gear and a dead opener within a season. We replace the gear, inspect the track and rollers, and set the force limits correctly so the next gear lasts.
Garage Door Motor Replacement in Sunset
Garage Door Motor Replacement in Sunset means swapping the entire powerhead and rail assembly, and it runs $250 – $550 installed. If your current motor is 15 or more years old, or if the opener is a chain-drive unit that’s been fighting a heavy wood door for decades, replacement is usually cheaper than repeated repairs within two years. We quote the full installed price before any work starts, and that number doesn’t move once we’re in the garage.
What Fits a Low-Clearance 1960s Opening
Many Sunset ranches have low headroom above the door: 8 to 10 inches of clearance where a modern opener rail needs 14. We use low-clearance track kits and side-mount jackshaft openers where they fit, so the motor sits on the wall beside the door instead of hanging over your hood. This keeps the opener out of the way and gives you back ceiling space in a garage that was never generous to begin with.
Belt vs. Chain for Block-Wall Garages
Sound carries through concrete-block walls and into the house. If your garage shares a wall with a bedroom, a belt-drive opener is noticeably quieter than a chain drive, and on Sunset’s older ranch layout that matters more than people expect. We carry both types and can install either same-day in most cases, with the price difference usually under $150.
Trusted Brands We Service in Sunset
We’re fluent in Genie, Clopay, Amarr, and Wayne Dalton, alongside the Chamberlain and LiftMaster units that dominate Sunset’s older housing stock. We stock brand-matched remotes, keypads, safety sensors, and logic boards for common models locally, so a repair doesn’t stall out waiting on a part to ship from a distribution center. Whatever brand is on your garage, we know it. From the panels to the opener, we cover the whole system, and we won’t try to sell you a proprietary replacement when your current unit is repairable.
Common Garage Door Opener Repair Problems We See in Sunset Homes
- Salt-corroded rollers and hinges on original steel doors. The opener labors against a door that no longer rolls smoothly, which shortens motor life and strips drive gears. We replace the rollers and rebalance the door before blaming the opener.
- Misaligned photo-eyes from settling slabs and storm-driven door flex. In ZIP 33173, concrete slabs shift over decades and hurricane-force winds rack the door tracks. The sensor beam gets knocked out of line and the door refuses to close.
- Stripped plastic drive gears from forcing a bound door. These are the most common opener failure we see on Sunset’s original single-car openings, where a sagging wood door meets an under-lubricated track and the homeowner holds the wall button down.
- Dead wall panels and unprogrammed remotes after power surges. Florida’s afternoon lightning storms blow through fast and knock out opener logic boards and remote codes. We reset rolling codes and replace surge-damaged boards the same visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Opener Repair in Sunset, FL
Here’s what Sunset homeowners should expect to pay when we come out:
| Service | Price Range |
|---|---|
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Roller Replacement | $110 – $220 |
| Track Realignment | $120 – $240 |
What moves the price: whether the motor head needs a gear or a full logic board, whether the door itself is out of balance and needs roller or spring work at the same time, and whether we’re switching from chain-drive to belt-drive or adding a battery backup. We quote the exact price before any work starts. If the quote changes, we stop and call you first. Estimates are free, and the price we agree on is the price on the invoice.
On a narrow single-car opening in a 1960s block ranch off Sunset Drive, our tech traced a LiftMaster opener that kept reversing to a misaligned photo-eye sensor knocked out of line by a sagging door, plus a binding track from salt-corroded rollers. We rebalanced the sectional door, replaced the rollers, realigned the opener rail and track, and reset the rolling-code remotes so the homeowner could stop leaving the door cracked for the dog. That visit cost $260 all-in and took under two hours.
We Also Serve Cities Near Sunset
Our service map covers Sunset and the neighborhoods around it: Olympia Heights, Westwood Lake, Richmond Heights, and Kendale Lakes. If you’re just outside ZIP 33173, we still take the call. This page is part of our Garage Door Opener Repair service area hub, and you can see the full picture of our Garage Door Opener Repair in Sunset coverage there.
Serving Sunset, FL — Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Opener Repair in Sunset
Yes. A modern opener fits a low-clearance 1960s opening in Sunset either with a low-clearance rail kit or, better, a side-mount jackshaft unit that bolts to the wall beside the door instead of hanging overhead. Rolling-code remotes are standard on every opener we install, and they work regardless of the door’s age. Call (877) 265-9120 and we’ll measure the headroom before quoting anything.
Reversing openers after a storm scare in Sunset almost always trace to the photo-eye sensors, not the driveway. High winds rack the door tracks, the doors shift a quarter-inch, and the sensor beam breaks alignment. We realign the eyes, check the track for wind damage, and reset the closing force, usually for $120 – $180. If the opener still reverses, the problem is the logic board, and we quote that separately before touching it.
You can just repair the opener. A hurricane-rated door and an opener repair are separate jobs, and we won’t push you into a door replacement you don’t need. That said, if your original 1960s door frame has never been reinforced for HVHZ wind loads, we’ll point it out and quote the reinforcement separately. The opener repair moves forward either way. Call (877) 265-9120 for a straight answer.
Often, yes. When a torsion spring loses tension on an older Sunset ranch door, the opener has to pull a door that suddenly weighs 40 or 50 pounds more than it should. You’ll hear the motor grunt, the chain rattle, and the door hesitate. Spring repair runs $180 – $340 in Sunset, and we’ll test the spring tension before declaring the opener at fault.
Yes, every week. LiftMaster and Chamberlain are the two most common openers we see on Sunset Drive and the surrounding 33173 subdivisions, and we stock logic boards, gears, remotes, and sensors for both. We service them in place, on the original concrete-block homes, without trying to sell you a proprietary replacement. Call (877) 265-9120 and we’ll have a tech out same day.
Written by Phil Drummond, Owner at West Palm Beach Garage Door Co, serving Sunset and southwest Miami-Dade since the company started. Garage doors are all we do.
Call West Palm Beach Garage Door Co for Opener Repair in Sunset
If your garage door opener is down, making noise, or refusing to close, call (877) 265-9120 now. We answer during business hours, and we’ll give you a straight price range before we roll. Estimates are free, the price is locked before work starts, and we service every major brand on Sunset’s concrete-block ranches. Back to working order, the same visit.